0 item(s)
Filter by
Price
  1. 15
    2060
Voltage
Producer's warranty

Accessories

Battery enhancement and protection


In recent years, the demand for battery accessories has increased significantly due to the increasing use of the devices powered by them. These are essential components to ensure durability and performance.

Accessories play a critical role in increasing battery performance, extending battery life, and ensuring the safety and protection of systems that rely on batteries.

You can see the European Commission directive on batteries here: https://ec.europa.eu/commission/presscorner/detail/en/ip_22_7588


In conclusion

Battery accessories are a vital aspect of modern technology and play an important role in ensuring the proper functioning and longevity of devices and the batteries they power.

  1. VE.Bus Battery management system for lithium batteries Victron - 1000A
  2. Displays information about your high voltage battery pack.

    It has built-in Bluetooth.

  3. Displays information about your high voltage battery pack.

  4. We are official Victron Energy importer for Bulgaria.

  5. We are an official importer of Victron Energy B.V. DC charger 50A for two-battery systems in vehicles and yachts where a Smart-alternator charges the starter battery to 12V and the service battery to 12V
  6. Features:

    • Fully automatic
    • Maximizes battery life
    • Battery Guard to protect your secondary battery from total discharge
    • Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging
    • Battery temperature protection for added safety
    • Splash and dust proof (IP65)
  7. Battery combiner used in campers, yachts , caravans, etc. Can be used in 24V and 48Vdc systems
  8. Battery combiner used in campers, yachts , caravans, etc. Can be used in 12V and 24Vdc systems
  9. The SmartShunt 2000A/50mV IP65 is a high precision battery monitor.

    • Wide input voltage range: 6,5 – 70V ;
    • High current measurement resolution: 10 mA (0,01A);
    • Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24VBMV.
  10. Remotely monitor your inverter's data through the data server at any time /p>

  11. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  12. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  13. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  14. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  15. This battery management system is for Victron's lithium batteries. For more details regarding the product and its usage - please, contact us!
  16. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  17. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  18. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  19. The BMV-712 smart is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  20. The SmartShunt 1000A/50mV IP65 is a high precision battery monitor.

    • Wide input voltage range: 6,5 – 70V ;
    • High current measurement resolution: 10 mA (0,01A);
    • Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24VBMV.
  21. The Cyrix-Li-Charge will disengage battery immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature
  22. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  23. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  24. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  25. Features

    • Bluetooth Smart enabled;
    • Fully programmable;
    • Adaptive 3-stage chargealgorithm: bulk absorption float;
    • Remote on-off;
    • Short circuit proof and can be paralleled to increase output current;
    • High temperature protected;
    • IP43 protection;
    • Screw terminals;
    • Input fuse (not replaceable).

     

  26. The Smart BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A.

    Peak current (during 30 seconds) 250A.

    Operating voltage range 24 - 70V.

  27. The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
  28. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A

    Peak current 250A

    Operating voltage range 24-64V

  29. Battery combiner used in campers, yachts , caravans, etc. Can be used in 12V and 24Vdc systems
  30. The BMS will: 1.Disconnect or shut down the load whenever the voltage of a battery cell falls to less than 2,5V. 2.Stop the charging process whenever the voltage of a battery cell increases to more than 4,2V. 3.Shut down the system whenever the temperature of a cell exceeds 50°C.
  31. The SmartShunt 500A/50mV IP65 is a high precision battery monitor.

    • Wide input voltage range: 6,5 – 70V ;
    • High current measurement resolution: 10 mA (0,01A);
    • Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24VBMV.
  32. The SmartShunt 500A is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  33. The Smart BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 220A.

    Peak current (during 30 seconds) 600A.

    Operating voltage range 6-35V

  34. The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  35. Remotely monitor your inverter's data through the data server at any time /p>

  36. Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data..
  37. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 220A

    Peak current (during 30 seconds) 600A

    Operating voltage range 6-35V

  38. The Smart BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A.

    Peak current (during 30 seconds) 600A.

    Operating voltage range 6-35V

  39. The Battery Alarm is a small and low cost alarm panel which monitors your battery bank.

  40. The Smart BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 65A.

    Peak current (during 30 seconds) 250A.

    Operating voltage range 6-35V

  41. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A

    Peak current 600A

    Operating voltage range 6-35V

  42. The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.
  43. Battery combiner used in campers, yachts, caravans, etc.
  44. VE.Bus miniBMS Battery management system for lithium batteries Victron

  45. Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data..
  46. DC SWITCH DISCONNECTOR 50A 1000Vdc

    Certified according to the European standard IEC EN 60947 (TÜV)

    Mounting on DIN rail

  47. We are official Victron Energy importer and service center for Bulgaria

  48. A a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

  49. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 65A

    Peak current (during 30 seconds) 300A

    Operating voltage range 6-35V

  50. The argo diode battery combiner is used to guarantee continuous DC power to mission critical equipment.

    With the diode battery combiner two DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

  51. M8 circular connector Male and Female with cables for connecting two or more lithium-ion batteries and to a lithium battery control system VE.Bus BMS
  52. Battery Switch ON/OFF 275A

    Voltage rating 48V

  53. VE.Bus to BMS 12-200 alternator control cable. Victron Energy
  54. It measures current flowing from and to the batteries and sends it to the battery monitor for processing. It is mounted on the minus cable, near the battery block.

  55. Connector between AGM / GEL batteries 90-220Ah