0 item(s)

EnerDC MPPT solar charge controller 90V / 20A with display

  • Day/night timing and light dimming option
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Load Output
  • Max. charging current: 20A ; 12V or 24V systems

SKU: enerDC90-20
209 €106.59 VAT included

Availability: In stock

Delivery time: 1-3 days

EnerDC MPPT solar charge controller 90V / 20A with display is available for purchase in increments of 1
Quantity:

Advanced MPPT real-time tracking algorithm of the EnerDC 90 | 20 solar charger

This controller allows you to charge a 12Vdc battery bank using standard 250-275Wp 60cells poly- or moncrystalline modules. The fast MPPT controller will improve energy harvest  by up to 10% compared to slower MPPT controllers.



Programmable options and auto 12/24V recognition

You can choose from two standard battery types - GEL and Liquid. Also, you can set a night-light function or low-disconnect voltage



LCD display with many features

Read real-time PV voltage , PV current, Battery voltage, Battery current or check historic data



Four-steps charging algorithm

Ensure a reliable, fast and safe charging with the four-steps charging algorithm



Many protections against various treats

Protections against: PV over current, PV short circuit, PV reverse polarity, Battery reverse polarity, Batery overvoltage, Battery deep discharge, Load short circuit, Load over current

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output (except for inverters). The load output will disconnect the load when the battery has been discharged to a pre-set voltage


Day/night timing
You can use this controller in street-lighting applications. It can automatically start a connected load (lights) at sunset and it can stop them at sunrise, or you can set the working hours of the lights during the night

Suitable modules

A single controller can be used in various PV-configurations. Below are the most frequently-used ones. Several controllers can work in parallel.

12Vdc battery:

  • 250-275Wp PV modules with 60cells
  • 250-275Wp PV modules with 72 cells
  • Two or three 80-90Wp modules with 36cells connected in series or parallel

24Vdc battery

  • Two 250-275Wp modules with 60 cells each connected in series
  • Two 250-275Wp modules with 72 cells each connected in parallel
  • Three 80-90Wp modules with 36 cells each connected in series

 

Full specifications of EnerDC 90 | 20

EnerDC 90| 20Values
System voltage 12V / 24V auto recognition
Max charging current 20А
МPPT charging voltage 14.5 / 29.0V @ 25°C
Boost voltage 14.5 / 29.0V @ 25°C
Equalization voltage 14.8 / 29.6V @ 25°C (liquid batteries)
Float voltage 13.7 / 27.45V @ 25°C
Low voltage disconnect 10.8~11.8V / 21.6~23.6V
Reconnect voltage 11.6~12.8V / 23.2~25.6V
Overcharge protection 15.5V / 31.0V
Maximum voltage on battery's terminal 35V
Temperature compensation -4.17mV/K per cell (boost, equalization)
-3.33mV/K per cell (Float)
Battery type Liquid / Gel / AGM
Maximum voltage on PV terminals 90V
Maximum input PV power 275Wp at 12Vdc systems
550Wp at 24Vdc systems
Dusk / Dawn detection voltage 8.0V at 12Vdc systems
16.0V at 24Vdc systems
MPPT tracking voltage (Battery voltage +1)-81Vdc at 12Vdc systems
Load output current 20A
Operating mode Standard / Dusk to Dawn / Street lamp mode (2~9 hours)
Maximum tracking efficiency >99 %
Maximum charge conversion 97 %
Dimensions (mm) 189 x 182 x 58
Weight 1200g
Self consumption 7mA
Ambien temperature from -20 to + 50°C
Storage temperature from -25 to +80°C
Ambient humidity 0~95% non-condensing
Protection degree IP32
Maximum altitude 4000m