FIBARO Relay Switch 2x1.5kW

Relay Switch 2 x 1,5kW (FGS-222) Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of combine current up to 10A.  Fibaro Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to it. Features: Double relay switch capable of operating two independent loads of up to 1.5KW (6.5A) each. Controlled through other Fibaro devices or any Z-Wave controller The smallest device of this type in the World! Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide Independent control of two separate loads (1.5KW / 6.5A each) Maximum load per channel: 6.5A (1.5Kw) Maximum total load: 10A Can use mains or alternative power supply for load (including DC) Works with AC power supply only (110-230V AC)

Example: If you want to turn off the TV or PC in the Children's room after 10:00, this can happen automatically with the Flayer Relay Switch 2 x 1,5kW (FGS-222) usadge.

Specifications

• Power supply: 110 - 240V ~ 50 - 60Hz
• Power consumption : to 0,8W
• Operational temperature: 0 - 35°C
• Dimensions (L x W x H): 42,50 x 38,25 x 20,30 mm
• For installation in boxes: Ø ≥ 50mm
• Rated load current:   6,5A per channel for resistive  load, but total current can not exceed 10A*
• Overcurrent protection: required external 10A circuit breaker
• Active element: micro-gap relay switch
• Device control: remotely - radio waves; directly - push buttons
• Radio protoco:  Z-Wave
• Radio signal power: 1mW
• Radio Frequency:  868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ;  869,2 MHz RU;865,2 MHz IN;
• Range: up to 50 m outdoors;  up to 30 m indoors;  (depending on building materials)
• Comply with EU directives:  RoHS 2011/65/EU, LVD 2006/95/EC, EMC 2004/108/EC, R&TTE 1999/5/EC