0 item(s)

Solar Charge Controller BlueSolar PWM-LCD&USB 12/24V-30A

  • Load output with low battery voltage disconnect function. 
  • Lighting control function, one timer only. 
  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
  • Three stage battery charging (bulk, absorption, float), not programmable.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar array and/or battery.
  • Day/night timing options: see manual for details

SKU: SCC010030050
104 €53.04 VAT included

Availability: Backorder

Delivery time: 8-15 days

Quantity:

Liquid crystal display

For status monitoring and set-up

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.The connect and disconnect voltages are adjustable.

Day/night timing of the load output

This option allows for a pre-set ON-time after dusk.

Programmable battery charge algorithm

Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)

Two 5 Volt USB outputs

Maximum current (both outputs combined): 2A

 

BlueSolar PWM Charge Controller12/24-30
Battery Voltage 12/24 V with automatic system voltage detection
Rated charge current 30А 
Automatic load disconnect Yes
Maximum solar voltage 28V / 55V (1)
Self-consumption <10mA
Load output Manual control + low voltage disconnect +timer 
Protection Battery reverse polarity (fuse). Output short circuit. Over temperature
Overload protection Shut down after 60 s in case of 130% load
Shut down after 5 s in case of 130% load
Short circuit: immediate shut down
Grounding Common positive
Operating temp. range -35 to +60°C (full load)
Humidity (non-condensing) 95%
BATTERY  
Charge voltage 'absorption' 14.4V / 28.8V
Charge voltage 'float'  (2) 13.7V / 27.4V
Low voltage load disconnect 11.2V / 22.4V
Low voltage load reconnect 12.6V / 25.2V
USB  
Voltage 5 VDC
Current 2A (total from 2 outputs)
ENCLOSURE  
Protection class IP20
Terminal size 16мм2
 Weight 0.3кг 
 Dimensions (h x w x d) 101х184х47мм
 STANDARDS  
Safety EN60335-1, IEC 62109-1 
 EMC  EN 61000-6-1, EN 61000-6-3, ISO 7637-2

1) For 12V use 36 cell solar panels. For 24V use 72 cell solar panels or 2x 36 cell in series.

2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached.Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.

View FileСЕ Декларация / CE Declaration    File size: (36.9 KB)
View FileТехнически данни / Datasheet    File size: (224.95 KB)
View FileПредставителство на ф.Чепъков за България    File size: (326.95 KB)