In the world of renewables, solar energy is becoming increasingly popular as a means of reducing our carbon footprint. A solar charge controller is an essential component in a solar power system that manages the charging of batteries from solar panels. BlueSolar PWM-LCD&USB 48V-10A is a popular controller that offers several advanced features. Here we will take a thorough look at this device and its benefits.
It is an electronic device that regulates the electrical charge of the battery from a photovoltaic panel. It prevents the battery from overcharging, which can cause damage or even fire. It also protects the battery from over-discharging, which can shorten its life.
This is a controller manufactured by Victron Energy- Netherlands. It is designed to work with 48-volt battery systems with up to 10 amps of current. The device features a large LCD screen that displays important information such as battery voltage, charging current and state of charge. There is also a built-in 5VDC USB port for charging mobile devices.
Efficient Charging: BlueSolar PWM-LCD&USB 48V-10A uses Pulse Width Modulation (PWM) technology to regulate the charge from the solar panel to the battery. This results in a more efficient charging process that increases the amount of energy delivered to the battery.
Advanced Features: The device comes with several advanced features that set it apart from other such controllers. The LCD screen provides real-time information on the charging process, making it easy to monitor and manage the system. The built-in USB port also provides a convenient way to recharge mobile devices.
Safe and reliable: BlueSolar PWM-LCD&USB 48V-10A is designed with safe operation in mind. It has built-in overcharge, deep discharge and short circuit protections. This ensures that the battery and solar charge controller are protected from damage.
Excessive discharge of the battery can be prevented by connecting all loads to the outlet for the consumers (loads). The output will turn off the load when the battery is discharged to a preset voltage.
This option allows for a preset turn-on time after dark. It is useful in night lighting systems.
Pre-programmed algorithms for AGM, GEL, liquid electrolyte or LiFePO4 batteries (only with internal BMS).
BlueSolar PWM-LCD&USB 48V-10A is an excellent solar charge controller that offers several advantages: efficient charge, large display, USB charging output. This is a very useful device for your solar system at a good price. Contact us now at mail@chepakov.com to advise you on the best option for your configuration.
Battery Voltage | 48 V |
Rated charge current | 10А |
Automatic load disconnect | Yes |
Maximum solar voltage | 100V (1) |
Self-consumption | <10mA |
Load output | Manual control + low voltage disconnect +timer |
Protection | Battery reverse polarity (fuse). Output short circuit. Over temperature |
Overload protection | Shut down after 60 s in case of 130% load Shut down after 5 s in case of 130% load Short circuit: immediate shut down |
Grounding | Common positive |
Operating temp. range | -35 to +60°C (full load) |
Humidity (non-condensing) | 95% |
BATTERY | |
Charge voltage 'absorption' | 57,6V |
Charge voltage 'float' (2) | 54,8V |
Low voltage load disconnect | 44,8V |
Low voltage load reconnect | 50,4V |
USB | |
Voltage | 5 VDC |
Current | 2A (total from 2 outputs) |
ENCLOSURE | |
Protection class | IP20 |
Terminal size | 16мм2 |
Weight | 0.3кг |
Dimensions (h x w x d) | 101х184х47мм |
STANDARDS | |
Safety | EN60335-1, IEC 62109-1 |
EMC | EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
1) For 12V use 36 cell solar panels. For 24V use 72 cell solar panels or 2x 36 cell in series. For 48V use 2x 72 cell solar panels or 4x 36 cell in series.
2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached.Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.