Charges two separate batteries. For example, the starter battery and the service battery of a boat or mobile home
For status monitoring and set-up
Protected against reverse polarity connection of the solar panels and/or battery
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Maximum current (both outputs combined): 2A
BlueSolar PWM Charge Controller | 12/24-20 |
---|---|
Battery Voltage |
12/24 V with automatic system voltage detection [for LiFePO4 no automatic system voltage detection] |
Rated charge current | 20А |
Automatic load disconnect | Yes |
Maximum solar voltage | 28V / 55V (1) |
Self-consumption | <10mA |
Protection | Battery reverse polarity (fuse). Over temperature |
Grounding | Common positive |
Operating temp. range | -35 to +55°C (full load) |
Humidity (non-condensing) | max 95% |
BATTERY | |
Charge voltage 'absorption' | 14.4V / 28.8V |
Charge voltage 'float' (2) | 13.7V / 27.4V |
Low voltage load disconnect | 11.2V / 22.4V |
USB | |
Voltage | 5 VDC |
Current | 2A (total from 2 outputs) |
ENCLOSURE | |
Protection class | IP20 |
Terminal size | 16мм2 |
Weight | 0.3кг |
Dimensions (h x w x d) | 101.5х184х47.1мм |
STANDARDS | |
Safety | IEC 62109-1 |
EMC | EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
1) For 12V use 36 cell solar panels. For 24V use 72 cell solar panels or 2x 36 cell in series.
2)See manual for alternative voltage settings