Three devices in one case
This unit is equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in compact size. Besides, it’s worry-free to start up motor-type loads such as refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, Computers, power tool and battery chargers.
Functions
- Pure sine wave inverter;
- LCD display with many features - Read real-time PV voltage, PV current, Battery voltage, Battery current, AC input, AC output or check, historic data;
- This model can operate even if no batteries are connected to it leading to huge cost-savings. In order to do that - AC must be present;
- Output power factor 1;
- Built-in battery equalization function to extend battery life cycle;
- Built-in MPPT solar charge controller (two trackers);
- Selectable input voltage range for home appliances and personal computers;
- Selectable charging current based on applications;
- Configurable AC / Solar input priority via LCD setting;
- Compatible to mains voltage or generator power;
- Battery equalization for optimized battery performance and lifecycle;
- Fully programmable;
- Intergrated WiFi card;
- Six inverters can operate in parallel; three/six inverters can operate in three-phased system.
Operating modes
- Works with or without PV panels: the inverters can be connected to PV panels in various configurations. Check specifications below for more information
- Works with or without batteries: If Nitro is connected to Solar panels and AC grid - it can operate without batteries! If your panels do not produce enough energy - the inverter takes it from the AC grid.
- Works with or without AC grid or Gen-set: the inverter can be connected to AC grid, which can be used to either charge the batteries or supply additional power to meet the demand of the connected appliances.
- Uninterruptible power supply: Can be used as reliable uninterruptible power supply (if batteries are connected). Large battery banks can provide hours of back-up energy.
Example applications
- Energy storage systems (ESS) or off-grid applications - just connect the unit to PV panels and batteries for back-up power. It will be the heart of your solar system;
- Grid-connected Self-consumption without batteries - connect PV panes and use their energy to directly power your loads without feeding-back energy. You need AC grid for that;
- Use the unit together with a battery bank as UPS system.
Data
| Values |
RATED POWER |
8000VA / 8000W |
Voltage |
230V |
Selectable Input Voltage Range |
170-280 VAC OR 90-280 VAC |
Frequency range |
50 / 60Hz (Auto detection) |
AC Voltage Regulation (Batt. mode) |
230VAC +/- 5% |
Surge Power |
2* rated power for 5 seconds |
Efficiency (peak) |
93% |
Transfer time |
10ms (for personal computers) 20ms (for home appliances) |
Waveform |
Pure sine wave |
Battery Voltage |
48Vdc |
Floating Charge Voltage |
54Vdc |
Overcharge Protection |
63Vdc |
Solar charger type |
MPPT |
Maximum PV Array Power |
8000W |
Maximum Solar Charge Current |
120А |
Maximum AC Charge Current |
120А |
Maximum charge current |
120A |
Dimension, D x W x H (mm) |
147.4 х 432.5 х 553.6 |
Net Weight (kgs) |
18.4 |
Humidity |
5-95% Non-condensing |
Operating Temperature* |
-10 to 50°C |
Storage Temperature |
-15 to 60°C |