Inverter Prices

The Phoenix Inverter Control Ve.Direct panel is made to control all Phoenix Inverters with Ve.Direct interface.

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

A a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

A a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

The DC Con Kit enables the connection of both inputs in the event of MPP currents above 35 A and a cable cross section of more than 16 mm². The DC Con Kit 35 allows for cross sections of up to 35 mm² and is suitable for Fronius Symo 10.0 - 20.0 kW and Fronius Eco up to 27kW.

Fronius ambient temperature sensor for your PV system.

Fronius wind measurement sensor.

The Battery Alarm is a small and low cost alarm panel which monitors your battery bank.

The EM24 is for 3 phase monitoring only. 

There is a EM24 meter model for RS485 connection and one that connects over Ethernet. All ET models connect via RS485.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

The Phoenix Inverter Control - panel is made for monitoring and control on inverters

Remotely monitor your inverter's data through the data server at any time /p>

Full sinewave. Protection from overloading, low/high voltage of the batteries, high temperature, short circuit of the output, 5 years warranty. High Peak Power: 24V 250VA

Full sinewave. Protection from overloading, low/high voltage of the batteries, high temperature, short circuit of the output, 5 years warranty. High Peak Power

Fronius irradiation measurement sensor.

Fronius PV module surface temperature sensor for your PV system.

The EM24 is for 3 phase monitoring only. 

There is a EM24 meter model for RS485 connection and one that connects over Ethernet. All ET models connect via RS485.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

The Fronius Meter is a bidirectional meter which optimises self-consumption and records the household‘s load curve.

Remotely monitor your inverter's data through the data server at any time /p>

• Full sine wave
• 1000VA / 1000W
• 12V nominal voltage
• MPPT charger for up to 500Wp PV power
• АС charger 20А
• LCD display

The Fronius Datamanager is the communications centre for Fronius inverters for a variety of applications. Whenever it is connected to the internet via a LAN or WLAN, the Fronius Datamanager sends the PV system values directly to the Fronius Solar.web online portal. This provides you with an overview of how the system is operating at all times.

• Full sine wave;
• 3000VA / 3000W;
• 24V nominal voltage;
• Supply load from Grid or PV
• MPPT charger for up to 1000Wp PV power;
• Output source priority: Solar first; Utility first; Solar→Battery→Utility
• АС charger 25А;
• LCD display.

• Wide range of products
• Works with standard asynchronous motors and permanent magnet ones

• Solar pump inverter
• Wide range of products
• Works with standard asynchronous motors and permanent magnet ones

• Full sine wave;
• 6000VA / 6000W;
• 48V nominal voltage;
• Supply load from Grid or PV, even battery is not available;
• MPPT charger for up to 6000Wp PV power;
• АС charger 100А;
• Two independent outputs;
• LCD display.

•  nominal power: 800VA / 700W @25C
•  nominal voltage: 12V
•  AC charger : 35A
• Transfer switch: 16A

This single-phase, transformerless device is the ideal inverter for private households.

•  nominal power: 2000VA / 1600W @25C
•  nominal voltage: 48V
•  AC charger : 25A
• Transfer switch: 35A

With power 3.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

•  nominal power: 1200VA / 1000W @25C
•  nominal voltage: 12V
•  AC charger : 50A
• Transfer switch: 16A

3 kW, transformerless inverter for private households.

Innovative SuperFlex Design for maximum flexibility in system design,

•  nominal power: 1600VA / 1300W @25C
•  nominal voltage: 12V
•  AC charger : 70A
• Transfer switch: 16A

•  nominal power: 1200VA / 1000W @25C
•  nominal voltage: 24V
•  AC charger : 25A
• Transfer switch: 16A

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 32A

•  nominal power: 1600VA / 1300W @25C
•  nominal voltage: 24V
•  AC charger : 25A
• Transfer switch: 16A

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

With power 3.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

Single-phase, transformerless inverter for private household

With innovative SuperFlex Design

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 32A

• Full sine wave;
• 8000VA / 8000W;
• 48V nominal voltage;
• Supply load from Grid or PV, even battery is not available;
• 2 inputs MPPT charger for up to 8000Wp PV power;
• АС charger 120А;
• LCD display.

Single-phase, transformerless 4.6 kW inverter for private households.

Innovative SuperFlex Design

With power 3.7 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

•  nominal power: 2000VA / 1600W @25C
•  nominal voltage: 24V
•  AC charger : 50A
• Transfer switch: 30A

With power 3.7 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

With power 4,5 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.