With power 3.0 kW, the single-phase inverter allows Surplus energy from a photovoltaic system to be temporarily stored in the Battery.
It leaves nothing to be desired with numerous features such as energy management functions, WLAN connection as standard, Ethernet connectivity and easy integration of third-party components. Thanks to a selection of backup power options (PV Point, full backup) in particular, it ensures the highest degree of power supply reliability.
INPUT DATA | Fronius Primo Gen24 3.0 Plus | |
---|---|---|
Number of MPP trackers | 2 | |
Max. input current (Idc max MPPT1 / MPPT2) | 22 A / 12 A | |
Max. array short circuit current (MPPT1/MPPT2) | 33 A / 18 A | |
Dc input voltage range (Udc min - Udc max | 65 V - 600 V | |
Nominal input voltage (Udc,r) | 400 V | |
Feed-in start voltage (Udc start) | 80 V | |
Usable MPP voltage range | 65 V - 530 V | |
Number of DC connections (MPPT1/MPPT2) | 2 / 2 | |
Max. PV generator output (Pdc max) | 4.5 kWpeak | |
OUTPUT DATA | ||
AC nominal output (Pac,r) | 3000 W | |
Max. output power | 3000 VA | |
Max. AC output current (Iac max) | 19.40 A | |
Grid connection (voltage range) | 1~NPE 220 V / 230 V (+ 20 % / - 30 %) | |
Frequency (frequency range) | 50 Hz / 60 Hz (45 - 65 Hz) | |
Total harmonic distortion | < 2 % | |
Power factor (cos φac,r) | 0.85 - 1 ind. / cap. | |
Back-up power | 1~NPE 220 V / 230 V | |
OUTPUT DATA PV POINT / FULL BACKUP | ||
Nom. output power PV Point / full backup | 3000 Va / 3000 Va | |
Grid connection (voltage range) PV Point | 1~NPE 220 V / 230 V | |
Grid connection (voltage range) full backup | 1~NPE 220 V / 230 V | |
Switchover time | < 90 seconds | |
BATTERY CONNECTION | ||
Number of DC connections | 1 | |
Max. input current (idc max) | 22 A | |
Dc input voltage range (Udc min - Udc max) | 150 V - 455 V | |
Max. input / output power1) | 3110 W | |
Max. AC charging power | 3000 W | |
GENERAL DATA | ||
Dimensions (height x width x depth) | 528 x 474 x 163 mm | |
Weight (inverter / with packaging) | 16.6 / 19.2 kg | |
Degree of protection | IP 66 | |
Protection class | 1 | |
Nighttime power loss | < 10 W | |
Overvoltage category (DC / AC) 2) | 2 / 3 | |
Inverter design | Transformerless | |
Cooling | Regulated air cooling | |
Installation | Indoors and outdoors | |
Ambient temperature range | -40 - +60°C | |
Permitted humidity | 0 - 100 % | |
Max. altitude | 4000 m | |
DC PV connection technology | 4x Dc+ and 4x Dc- push-in spring terminals 2.5 - 10 mm² | |
DC battery connection technology | 1x BaTT+ and 1x BaTT- push-in spring terminals 2.5 - 10 mm² | |
AC connection technology | 3 pole ac push-in spring terminals 2.5 - 10 mm²3 pole backup power push-in spring terminals 1.5mm² - 10mm²2x Pe screw terminals 2.5 - 16 mm² and 3x 2.5 – 10mm² | |
Certificates and compliance with standards | IEC 62109, IEC 62909, AS/NZS 4777.2, CEI 0-21, ABNT BNR 16149 and 16150, IEC 62116, IEC 61727 4) | |
Back-up power functions | PV Point or full backup | |
Compatible batteries | BYD Battery-Box Premium HVS/HVM3) | |
EFFICIENCY | ||
Max. efficiency | 97.6 % | |
Europ. efficiency | 96.8 % | |
MPP-tracking efficiency | > 99.9 % | |
PROTECTIVE DEVICES | ||
Dc insulation measurement | Yes | |
Overload behaviour | Operating point shift, power limitation | |
Dc disconnector | Yes | |
Reverse polarity protection | Yes | |
INTERFACES | ||
WLAN / Ethernet LAN | Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON) | |
6x digital in/out + 6x digital in | interface to ripple control receiver, energy management | |
USB 2.0 (a-socket) | 1 A supply | |
Emergency stop (WSD) | yes | |
Datalogger and web server | Included | |
2x RS485 | Modbus RTU SunSpec (third-party supplier) / Fronius Smart Meter, battery, Fronius Ohmpilot |