0 item(s)

Lithium-iron-phosphate MG HE Battery 25,2V/200Ah

We are a reseller and service point of MG Energy Systems B.V. The Netherlands.

  • 200Ah 25.2V LiFePO4 battery;
  • Saves up to 70% ot space;
  • Saves up to 70% of weight;
  • 3000 cycles at 75% DOD.

SKU: MGHE24x200
7204 €3,674.04 VAT included

Availability: Backorder

Delivery time: 8-15 days

Quantity:

The HE Model

Each battery module consists of lithium-ion NMC battery cells. NMC's cell chemistry creates an advanced, high power product that delivers solid performance. When you replace lead-acid batteries with lithium-ion batteries, you will have more energy storage capacity while using the same weight and space

 Technical specifications

 

MGHE24x200
25.2 V / 200 Ah
Technology Lithium-Ion NMC
Cell configuration 7S64P
Nominal voltage 25.2 V
Nominal capacity 200 Ah
Nominal energy 5.0 kWh
Specific energy 1 175 Wh/kg
Weight 28.6 kg
Cycle life2
DOD 75 % - Economic mode 3000
DOD 95 % - Performance mode 2000
Discharge6
Discharge cut-off voltage 21.0 V
Recommended discharge current 60 A (0.3C)
Continuous discharge current 200 A (1.0 C)
Maximum discharge current 3 400 A (2.0 C)
Fuses 4 300A, fuse inside
Charge6
Max. charge voltage 29.4 V
Recommended charge current 60 A (0.3C)
Continuous charge curren  200 A (1.0 C)
Maximum charge current (10 s)3 300 A (1,5 C) 
Configuration
Series configuration Yes, up to 6. More on request.
Parallel configuration Yes, unlimited
Redundant mode Yes, Using multiple Master BMSs
Environmental
Operating temperature charge 0 to +45°C 
Operating temperature discharge -20 to +55°C 
Recommended storage temperature  10 to +35°C
Humidity (non-condensing) ≤ 75 %
Mechanical
Power connections  M8 stud, 20 Nm
IP-Protection class  IP20
Cooling Air, forced (2x fan inside)
Dimensions ( l x h x w ) 366 x 355 x 193 mm
Safety
Battery Management System (BMS)  Integrated slave BMS
Balancing  Passive
Compatible BMS master controller  MG Master LV, MG Master HV5
Communication CAN-Bus, RJ45 or M12 connection
Standards
EMC: Emission EN-IEC 61000-6-3:2007/A1:2011/C11:2012 
EMC: Immunity  EN-IEC 61000-6-1:2007
Low voltage directive EN-IEC 60335-1:2012/A11:2014
Approvals IEC-EN62619, IEC-EN62620 (ES-TRIN)

FootnotesIncluding BMS and enclosure.

  1. Including BMS and enclosure.
  2. End-of-Life is 70% of initial capacity at 25 °C. Cycle life is depending on the battery temperature. Higher
    battery temperature will result in lower number of cycles.
  3. Duration is depending on battery temperature.
  4. Fuses can be replaced with dummy fuses for high power and high voltage applications. In this case the
    batteries need to be fuse elsewhere in the circuit.
  5. For systems >144 V, order the M12, HV version
  6. Charge and discharge rates depending on battery temperature and State-Of-Charge.
View FileТехнически данни / Datasheet    File size: (575.24 KB)