Inverter Prices

The Phoenix Inverter Control Ve.Direct panel is made to control all Phoenix Inverters with Ve.Direct interface.

A a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

A a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

The DC Con Kit enables the connection of both inputs in the event of MPP currents above 35 A and a cable cross section of more than 16 mm². The DC Con Kit 35 allows for cross sections of up to 35 mm² and is suitable for Fronius Symo 10.0 - 20.0 kW and Fronius Eco up to 27kW.

Fronius ambient temperature sensor for your PV system.

The Battery Alarm is a small and low cost alarm panel which monitors your battery bank.

Full sinewave. Protection from overloading, low/high voltage of the batteries, high temperature, short circuit of the output, 5 years warranty. High Peak Power: 24V 250VA

Fronius wind measurement sensor.

The Phoenix Inverter Control - panel is made for monitoring and control on inverters

Full sinewave. Protection from overloading, low/high voltage of the batteries, high temperature, short circuit of the output, 5 years warranty. High Peak Power

Fronius irradiation measurement sensor.

Fronius PV module surface temperature sensor for your PV system.

The Fronius Datamanager is the communications centre for Fronius inverters for a variety of applications. Whenever it is connected to the internet via a LAN or WLAN, the Fronius Datamanager sends the PV system values directly to the Fronius Solar.web online portal. This provides you with an overview of how the system is operating at all times.

Can be used for step up, step down and split phase output balancing purposes for 240V AC and 120V AC loads.

Maximum current 32A;

•  nominal power: 800VA / 700W @25C
•  nominal voltage: 12V
•  AC charger : 35A
• Transfer switch: 16A

Can be used for step up, step down and split phase output balancing purposes for 240V AC and 120V AC loads.

Maximum current 100A;

•  nominal power: 2000VA / 1600W @25C
•  nominal voltage: 48V
•  AC charger : 25A
• Transfer switch: 35A

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 32A

•  nominal power: 1200VA / 1000W @25C
•  nominal voltage: 24V
•  AC charger : 25A
• Transfer switch: 16A

•  nominal power: 1200VA / 1000W @25C
•  nominal voltage: 12V
•  AC charger : 50A
• Transfer switch: 16A

•  nominal power: 1600VA / 1300W @25C
•  nominal voltage: 24V
•  AC charger : 25A
• Transfer switch: 16A

•  nominal power: 1600VA / 1300W @25C
•  nominal voltage: 12V
•  AC charger : 70A
• Transfer switch: 16A

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 16A

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 50A

This single-phase, transformerless device is the ideal inverter for private households.

With power 3.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 32A

3 kW, transformerless inverter for private households.

Innovative SuperFlex Design for maximum flexibility in system design,

•  nominal power: 5000VA / 4000W @25C
•  nominal voltage: 48V
•  AC charger : 70A
• Transfer switch: 50A

•  nominal power: 2000VA / 1600W @25C
•  nominal voltage: 12V
•  AC charger : 80A
• Transfer switch: 30A

•  nominal power: 2000VA / 1600W @25C
•  nominal voltage: 24V
•  AC charger : 50A
• Transfer switch: 30A

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

With power 3.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

Single-phase, transformerless inverter for private household

With innovative SuperFlex Design

With power 3.7 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.

All-in-one solar power solution

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

All-in-one solar power solution

The EasySolar combines a 100/50 MPPT Solar Charge Controller, a MultiPlus Compact inverter/charger 24V/1600VA/40-16 and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

Single-phase, transformerless 4.6 kW inverter for private households.

Innovative SuperFlex Design

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 48V
•  AC charger : 35A
• Transfer switch: 32A

•  nominal power: 5000VA / 4000W @25C
•  nominal voltage: 48V
•  AC charger : 70A
• Transfer switch: 100A

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

With power 3.7 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

With power 4,5 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and a MPP tracker ensure maximum flexibility in system design.

Transformerless three-phase inverter.

High system voltage, wide input voltage range and two MPP trackers for maximum flexibility in system design.

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 24V
•  AC charger : 70A
• Transfer switch: 16A

5.0 kW, the transformer-less, three-phase inverter.

The high system voltage, wide input voltage range and two MPP trackers

With power 6.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

All-in-one solar power solution

The EasySolar combines a 250/70 MPPT Solar Charge Controller, a MultiPlus inverter-charger 48V/3000VA/35-32, GX device in one enclosure. The product is easy to install, with a minimum of wiring.

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 24V
•  AC charger : 70A
• Transfer switch: 50A

This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.

•  nominal power: 3000VA / 2400W @25C
•  nominal voltage: 12V
•  AC charger : 120A
• Transfer switch: 32A

3.6 kW, single-phase on-grid inverter with batteries

3.0 kW, one-phase on-grid inverter with batteries

• Full sine wave
• 2300VA
• 48V battery voltage
• АС charger 35А
• Outback - USA
• Operating temperature - from -40 to +60С

4.0 kW, single-phase on-grid inverter with batteries

•  nominal power: 8000VA / 6400W @25C
•  nominal voltage: 48V
•  AC charger : 110A
• Transfer switch: 100A