0 item(s)
Filter by

Search results for 'inverter Combining%20efficiency%20and%20reliability%20-%20High%20quality%20inverters%20%20We%20are%20professionals%20in%20the%20'

Maximum Search query length is 128. Your query was cut.

  1. 15 960Wp system

    • 38pcs DAH 420Wp Mono modules
    • EnerDC Titan 15000W
    • Fuses, surge arrester
    • Programmed for 0 export
  2. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

    • Full sine wave;
    • 15000VA / 15000W;
    • 48V nominal voltage;
    • it can work with and without batteries, with and without an mains;
    • 2 inputs MPPT charger for up to 16000Wp PV power;
    • Maximum Charging Current 300А;
    • LCD display.
  3. With power 10.0 kW, the transformerless Fronius Symo is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market.

    • Nominal capacity: 9.6kWh
    • Compatible with EnerDC Nitro / EnerDC Titan, Victron's MultiPlus / Quattro inverters.
    • Nominal capacity: 14.2kWh
    • Compatible with EnerDC Nitro / EnerDC Titan, Victron's MultiPlus / Quattro inverters.
      • Full sine wave;
      • 3000VA / 3000W;
      • 24V nominal voltage;
      • Supply load from Grid or PV
      • MPPT charger for up to 3000Wp PV power;
      • Output source priority: Solar first; Utility first; Solar→Battery→Utility
      • АС charger 80А;
      • LCD display.
    • Full sine wave
    • 1200VA / 1200W
    • 12V nominal voltage
    • MPPT charger for up to 2000Wp PV power
    • АС charger 80А
    • LCD display
    • Full sine wave;
    • 6000VA / 6000W;
    • 48V nominal voltage;
    • Supply load from Grid or PV, even battery is not available;
    • MPPT charger for up to 7000Wp PV power;
    • АС charger 120А;
    • Two independent outputs;
    • LCD display.
  4. Three-phase 27.0 kW

    IP 66 protection class

     

  5. 7560Wp system

    • 18pcs DAH 420Wp Mono modules
    • EnerDC Titan 8000VA
    • Fuses, surge arrester
    • Programmed for 0 export
  6. 29700Wp system

    • Eurener 450Wp panels
    • Huawai inverter 30kW
    • Fuses, surge arrester
  7. 50 kw three-phase inverter

    The high system voltage and two MPP trackers

  8. 36 kw three-phase inverter HUAWEI

    The high system voltage and two MPP trackers

    WLAN Integrated

  9. Can be used for step up, step down and split phase output balancing purposes for 240V AC and 120V AC loads.

    Maximum current 100A;

     

  10. Can be used for step up, step down and split phase output balancing purposes for 240V AC and 120V AC loads.

    Maximum current 32A;

     

    •  nominal power: 15000VA / 12000W @25C
    •  nominal voltage: 48V
    •  AC charger : 200A
    • Transfer switch: 100A
  11. Remotely monitor your inverter's data through the data server at any time /p>

    • 14.4 kWh Pylontech Batteries; (13.68kWh usable)
    • EnerDC Titan 8000VA;
    • 18 pcs. solar panes 420Wp;
    • 60m solar cable;
    • Fuses, surge arrester;
    • Programmed for 0 export to grid.
  12. Protective equipment (surge arrester and PV switch) for your inverter and / or solar charge controller

  13. 5880Wp system

    • 14pcs Eurener 420Wp Mono solar panels
    • EnerDC Nitro 6000VA
    • lithium batteries Pylontech 9.6kWh
    • Full sine wave;
    • 6000VA / 6000W;
    • 48V nominal voltage;
    • Supply load from Grid or PV, even battery is not available;
    • MPPT charger for up to 6000Wp PV power;
    • АС charger 100А;
    • Two independent outputs;
    • LCD display.
  14. Three-phase 27.0 kW

    IP 66 protection class

     

  15. The surge protection device type 1+2 for direct and indirect lightning strikes.

    We are the official representative and service of Fronius for Bulgaria.

  16. Three-phase 50 kW invertor with 3 MPP trackers.

    IP 65 protection class

     

  17. Three-phase 50 kW invertor with 3 MPP trackers.

    IP 65 protection class

     

  18. 40 kw three-phase inverter

    The high system voltage and two MPP trackers

    WLAN Integrated

  19. 15 kw three-phase inverter

    The high system voltage and two MPP trackers

    WLAN Integrated

  20. The Fronius Wattpilot 11j GO is the electric mobile car charger 11kW

    •  nominal power: 3000VA / 2400W @25C
    •  nominal voltage: 12V
    •  AC charger : 120A
    • Transfer switch: 32A
  21. 7200Wp system

    • DAH 420Wp solar panels (17pcs)
    • 6000W Sungrow
    • Programmed for 0 export
  22. This single-phase, transformerless device is the ideal inverter for private households.

    • Full sine wave;
    • 8000VA / 8000W;
    • 48V nominal voltage;
    • Supply load from Grid or PV, even battery is not available;
    • 2 inputs MPPT charger for up to 8000Wp PV power;
    • АС charger 120А;
    • LCD display.
  23. Protective equipment (surge arrester and PV switch) for your inverter and / or solar charge controller

  24. 3600Wp system

    • 8pcs Eurener 450Wp Poly modules
    • EnerDC Nitro 5000VA
    • 8 pcs. soalr panes 450Wp Eurener (Spain) or Sharp panels alternative
    • 40m solar cable.
    • Fuses, surge arrester
    • Programmed for 0 export
  25. 30 kw three-phase inverter

    The high system voltage and two MPP trackers

    WLAN Integrated

  26. 7200Wp system

    • 16pcs Eurener (Sharp) 450Wp Poly modules
    • EnerDC Titan 8000VA
    • Fuses, surge arrester
    • Programmed for 0 export
    • Nominal capacity: 14.2kWh
    • Compatible with EnerDC Nitro / EnerDC Titan, Victron's MultiPlus / Quattro inverters.
  27. The EM24 is for 3 phase monitoring only. 

    There is a EM24 meter model for RS485 connection and one that connects over Ethernet. All ET models connect via RS485.

    To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

  28. The EM24 is for 3 phase monitoring only. 

    There is a EM24 meter model for RS485 connection and one that connects over Ethernet. All ET models connect via RS485.

    To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

  29. The Phoenix Inverter Control Ve.Direct panel is made to control all Phoenix Inverters with Ve.Direct interface.

  30. The Phoenix Inverter Control - panel is made for monitoring and control on inverters

  31. The MK3 - USB interface is used to connect a VE.bus product to a computer via USB port.
    • Continuous output power at 25°C 4.5 - 5.3 kWC
    •  nominal voltage: 48V
    •  PV charger : 4000W
    •  nominal power: 3000VA / 2400W @25C
    •  nominal voltage: 48V
    •  AC charger : 35A
    • Transfer switch: 32A
    •  nominal power: 2000VA / 1600W @25C
    •  nominal voltage: 48V
    •  AC charger : 25A
    • Transfer switch: 35A
  32. nominal power: 5000VA  4000W @ 25оС
    batteries' voltage: 48V
    ac charger: 70A
    AC inputs / ouputs  2 / 2
    Peak power 9000W
  33. nominal power: 5000VA  4000W @ 25оС
    batteries' voltage: 24V
    ac charger: 120A
    AC inputs / ouputs  2 / 2
    Peak power 9000W
    •  nominal power: 10000VA / 8000W @25C
    •  nominal voltage: 48V
    •  AC charger : 140A
    • Transfer switch: 100A
    •  nominal power: 8000VA / 6400W @25C
    •  nominal voltage: 48V
    •  AC charger : 110A
    • Transfer switch: 100A
    • Nominal capacity: 9.6kWh
    • Compatible with EnerDC Nitro / EnerDC Titan, Victron's MultiPlus / Quattro inverters.
    • Nominal capacity: 7.2kWh
    • Compatible with EnerDC Nitro / EnerDC Titan, Victron's MultiPlus / Quattro inverters.
  34. Fronius irradiation measurement sensor.

  35. 5.0 kW, three-phase on-grid inverter with batteries

  36. 6.0 kW, single-phase on-grid inverter with batteries

  37. Three-phase 50 kW

    IP 65 protection class

     

  38. Three-phase 50 kW inverter

    1 MPPT

    IP 65 protection class

     

  39. 15.0 kW, transformer-less, three-phase inverter.

    High system voltage, wide input voltage range and two MPP trackers

  40. With power 20.0 kW, the transformerless Fronius Symo LIght is a three-phase inverter. The high system voltage, wide input voltage range and two MPP trackers ensure maximum flexibility in system design. The ease of integration of third-party components make the Fronius Symo Light one of the most communicative inverters on the market.

  41. 29700Wp system

    • Eurener 450Wp panels
    • Huawai inverter 30kW
    • Fuses, surge arrester
  42. Three-phase 27.0 kW

    IP 66 protection class

     

  43. 30 kw three-phase inverter

    The high system voltage and two MPP trackers

    WLAN Integrated

  44. Output             Full sine wave
    Nominal power at 250C
        6000VA / 4800W
    Peak power at 250C
        6000W
    Warranty of the producer     5 years
    Battery voltage
        48Vdc
  45. 30 kw three-phase inverter

    The high system voltage and two MPP trackers .

    • Nominal capacity: 22.08kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 19.32kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 16.56kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 13.80kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 11.04kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 10.24kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
    • Nominal capacity: 7.68kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
  46. 10.0 kW, three-phase on-grid inverter with batteries

  47. 8.0 kW, three-phase on-grid inverter with batteries

  48. 6.0 kW, single-phase on-grid inverter with batteries

  49. 5.0 kW, single-phase on-grid inverter with batteries

  50. 4.6 kW, single-phase on-grid inverter with batteries

  51. 4.0 kW, single-phase on-grid inverter with batteries

  52. 3.6 kW, single-phase on-grid inverter with batteries

    • Nominal capacity: 15.36kWh
    • Compatible with Victron inverters
    • Nominal capacity: 5.12kWh
    • Compatible with Fronius GEN24 inverters (Primo+Symo)
  53. 3.0 kW, one-phase on-grid inverter with batteries

    •  nominal power: 3000VA / 2400W @25C
    •  nominal voltage: 48V
    •  AC charger : 35A
    • Transfer switch: 32A
    • Full sine wave;
    • 7200VA / 7200W;
    • 48V nominal voltage;
    • Supply load from Grid or PV, even battery is not available;
    • MPPT charger for up to 8000Wp PV power;
    • АС charger 80А;
    • LCD display.
  54. All-in-one solar power solution

    The EasySolar combines a 250/70 MPPT Solar Charge Controller, a MultiPlus inverter-charger 48V/3000VA/35-32, GX device in one enclosure. The product is easy to install, with a minimum of wiring.

    • Day/night timing and light dimming option
    • Ultra-fast Maximum Power Point Tracking (MPPT)
    • BatteryLife: intelligent battery management
    • Load Output
    • Max. charging current: 20A ; 48V systems
  55. Output Signal:             Full sinewave
    Nominal Power:     1600VA / 1300W
    Peak Power:     2800W
    Charging current of the batteries:     20А
    Transfer Key:     16А @ 230Vac
    Producer Wattanty:     5 years
    Input Voltage:     48Vdc
  56. Output Signal:             Full sinewave
    Nominal Power:     1600VA / 1300W
    Peak Power:     2800W
    Charging current of the batteries:     40А
    Transfer Key:     16А @ 230Vac
    Producer Wattanty:     5 years
    Input Voltage:     24Vdc
  57. Output Signal:             Full sinewave
    Nominal Power:     1600VA / 1300W
    Peak Power:     2800W
    Charging current of the batteries:     70А
    Transfer Key:     16А @ 230Vac
    Producer Wattanty:     5 years
    Input Voltage:     12Vdc
  58. Output             Full sine wave
    Nominal power at 250C
        3000VA / 2400W
    Peak power at 250C
        6000W
    Warranty of the producer     5 years
    Battery voltage
        48Vdc
  59. Output             Full sine wave
    Nominal power at 250C
        3000VA / 2400W
    Peak power at 250C
        6000W
    Warranty of the producer     5 years
    Battery voltage
        24Vdc
  60. Output             Full sine wave
    Nominal power at 250C
        3000VA / 2400W
    Peak power at 250C
        6000W
    Warranty of the producer     5 years
    Battery voltage
        12Vdc
  61. Remotely monitor your inverter's data through the data server at any time /p>

  62. 3080Wp system

    • 7pcs Eurener 470Wp Poly modules
    • Fronius Primo 3.0 WLAN
    • Fuses, surge arrester
    • Programmed for 0 export
  63. 21600 Wp system

    • Eurener 450Wp panels
    • Fronius Symo 20.0 WLAN
    • Fuses, surge arrester
    • Programmed for 0 export
      • Full sine wave;
      • 3000VA / 3000W;
      • 24V nominal voltage;
      • Supply load from Grid or PV
      • MPPT charger for up to 1000Wp PV power;
      • Output source priority: Solar first; Utility first; Solar→Battery→Utility
      • АС charger 25А;
      • LCD display.
    • Load output with low battery voltage disconnect function. 
    • Lighting control function, one timer only. 
    • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
    • Three stage battery charging (bulk, absorption, float), not programmable.
    • Load output protected against over load and short circuit.
    • Protected against reverse polarity connection of the solar array and/or battery.
    • Day/night timing options: see manual for details